Welding products and industrial supplies

Our Products

Complete Welding & Industrial Supply

82+ products across 5 categories — from welding consumables to cutting and gouging products.

60+

Years of Legacy

16+

Trusted Brands

Industries Served

Product Categories

Welding Electrodes Welding Wires & Filler Materials Welding Accessories Welding Machines & Equipment Cutting & Gouging Products

Welding Electrodes

6 products

Wide range of welding electrodes for structural fabrication, repair, and industrial applications from India's most recognised manufacturers.

View Category

Mild Steel Electrodes

General Purpose Welding Performance

Mild steel electrodes are the most widely used consumables in arc welding, suitable for fabrication, structural, and general-purpose applications. These electrodes produce clean, stable welds on low and medium carbon steel.

5 featuresDetails

Stainless Steel Electrodes

Corrosion Resistant Weld Quality

Stainless steel electrodes are designed for welding austenitic and duplex stainless steels used in food processing, chemical, and pharmaceutical industries where corrosion resistance is critical.

5 featuresDetails

Low Hydrogen Electrodes

Crack-Resistant High Tensile Welding

Low hydrogen electrodes (E7018 type) are used for welding high-tensile and alloy steels where hydrogen-induced cracking must be avoided. They require pre-drying before use to maintain low moisture content.

5 featuresDetails

Hard Facing Electrodes

Wear and Abrasion Resistance

Hard facing electrodes are used to deposit wear-resistant layers on metal surfaces subject to abrasion, impact, or metal-to-metal wear. They extend the working life of industrial components significantly.

5 featuresDetails

Special Purpose Electrodes

Engineered for Specific Applications

Special purpose electrodes include cast iron, dissimilar metal, and cellulosic electrodes for applications where standard electrodes are not adequate. These are selected based on base material and service requirements.

5 featuresDetails

Maintenance & Repair Electrodes

Reliable Electrodes for Every Repair

Maintenance and repair electrodes are designed for on-site and workshop repair welding across a wide range of metals and conditions. These electrodes offer versatility and performance for routine MRO tasks.

5 featuresDetails

Welding Wires & Filler Materials

6 products

Welding wires and filler materials for MIG, TIG, flux-cored, and brazing processes — offering stable arc performance and reliable metal deposition.

View Category

MIG Welding Wire

Smooth and Consistent MIG Performance

MIG welding wire (ER70S-6) is a copper-coated solid wire used with CO₂ or mixed gas shielding for welding mild and carbon steel. It delivers clean, spatter-free welds with excellent bead appearance.

5 featuresDetails

TIG Welding Wire

Precision Filler for TIG Processes

TIG welding wire (filler rods) for GTAW processes are available in mild steel, stainless steel, and aluminium grades. They are used for high-quality, precision welds in critical applications.

5 featuresDetails

SAW Wire

High-Deposition Submerged Arc Welding

SAW (Submerged Arc Welding) wire is a copper-coated solid wire used with granular flux for high-productivity, deep-penetration welding on thick steel sections. It delivers a stable arc and clean weld deposits at high current levels.

5 featuresDetails

Flux Cored Wire

Higher Deposition for Structural Work

Flux cored wire (FCAW) provides higher deposition rates than solid wire and is suited for structural steel welding outdoors or in semi-automatic setups. Gas-shielded type offers excellent mechanical properties.

5 featuresDetails

Brazing Rods

Strong Joints Without Melting the Base

Brazing rods are used to join metals at temperatures below the melting point of the base material. Silver brazing alloys provide high-strength, leak-tight joints used in HVAC, refrigeration, and plumbing.

5 featuresDetails

Silver Brazing Rods

High Silver for Critical Joints

High-silver brazing alloy rods (BCuP and BAg series) deliver superior joint strength, ductility, and corrosion resistance. Used where joint reliability under vibration and thermal cycling is critical.

5 featuresDetails

Welding Accessories

61 products

Comprehensive range of gas cutting torches, pressure regulators, flash back arrestors, cutting nozzles, electrode holders, TIG/MIG torches, electrode ovens, and welding safety equipment for efficient industrial operations.

View Category

Gas Cutting Torches

Precision Oxy-Fuel Flame Cutting

A comprehensive range of gas cutting torches designed for oxy-acetylene and LPG flame cutting of mild steel. From standard 450mm torches to straight-head models for deep cutting, these brass-forged CE-certified torches deliver reliable performance across all cutting applications.

7 featuresDetails

Pressure Regulators

Accurate Gas Pressure Control for Welding

A complete range of brass-forged pressure regulators for oxygen, acetylene, argon, CO₂, LPG, nitrogen, and hydrogen cylinders. Available in single-gauge and double-gauge configurations, these CE-certified regulators ensure precise and stable gas delivery across MIG, TIG, and oxy-fuel welding applications.

7 featuresDetails

LPG Regulators

Safe and Reliable LPG Pressure Control

Specialised LPG regulators in brass/forged construction for industrial and commercial LPG gas supply. Available in pin-type, adaptor-type, heavy/medium-duty, and 22/25mm variants — all CE certified for safe operation with LPG cylinders.

6 featuresDetails

Flash Back Arrestors

Essential Safety Devices for Gas Lines

Flash back arrestors (flame arrestors) are safety devices fitted to oxygen and acetylene gas lines to prevent dangerous flash back flames from travelling back into the hose or cylinder. Available in deluxe, standard, and RO-RA variants — all CE certified with a 210 Psi maximum pressure rating.

7 featuresDetails

Gas Cutting Nozzles

Precision Nozzles for All Cutting Thicknesses

A comprehensive range of brass and copper gas cutting nozzles designed for oxy-fuel flame cutting from 6mm to 300mm material thickness. Includes standard, deluxe, profile, and nozzle mixing variants engineered for clean cuts, minimal kerf width, and resistance to flashback.

7 featuresDetails

Gas Welding Torches

Versatile Oxy-Fuel Welding and Brazing Torches

A complete range of gas welding torches for oxy-acetylene, LPG, hydrogen, and carbide gas welding. From LPG brass handle torches and high-pressure models to universal and monkey-type torches — all engineered for precise flame control in welding, brazing, and heating applications.

7 featuresDetails

Electrode Holders

High-Current Insulated Welding Holders

Fully insulated electrode holders (stingers) for MMA/stick welding, available in 400A and 600A ratings. The Super Litlu and Super Sporty models feature copper-forged and brass construction with DMC insulation for continuous-duty performance in heavy industrial welding environments.

7 featuresDetails

Pug Cutting Machine

Motorised Track-Guided Gas Cutting

The Pug cutting machine is a portable, motorised gas cutting unit that runs on an aluminium track for straight, accurate flame cuts on mild steel from 0 to 300mm thickness. Driven by a 1/4 HP electric motor with rotary speed control, it enables consistent bevel and straight cuts at precise angles up to 45 degrees on both sides.

7 featuresDetails

TIG & MIG Welding Torches

Professional Torches for Precision Arc Welding

A complete range of professional TIG and MIG welding torches and associated components. Includes gas-cooled and water-cooled TIG torches with heat-proof silicon rubber covers, gouging torches with ergonomic hard alloy bodies, MIG welding torches, and water-cooled copper wire rope for heavy-duty applications.

7 featuresDetails

Electrode Ovens

Controlled Storage and Drying for Low Hydrogen Electrodes

Electrode ovens maintain low hydrogen electrodes at the correct pre-heat temperature (50–400°C) to eliminate moisture and prevent hydrogen-induced weld cracking. Available in 25 Kg, 50 Kg, and 100 Kg capacities with thermostatic temperature control and CE certification. The CO₂ Pre Heater Box Type efficiently heats CO₂ gas prior to the pressure regulator for uninterrupted MIG welding.

7 featuresDetails

CO₂ Pre Heaters & Filler Wires

Preventing Gas Freeze and Pressure Drop in MIG Welding

CO₂ pre-heaters are installed between the gas cylinder and the pressure regulator to heat CO₂ gas before it enters the regulator, preventing cylinder freezing and pressure drop during continuous MIG welding. Available as standalone inline units and with core assembly in brass-forged construction. Also includes a TIG/MIG filler wire range in stainless steel, low carbon alloy, and aluminium grades.

7 featuresDetails

Welding Tools & Cylinder Keys

Essential Hand Tools for Gas and Arc Welding

A range of essential welding hand tools and cylinder keys designed for daily use in gas and arc welding workshops. Includes chipping hammers for slag removal, oxygen cylinder sliding keys, spindle keys for nitrous oxide and Freon gas cylinders, and five-way spanners for medical gas cylinders.

7 featuresDetails

Welding Helmets & Face Shields

Full Face Protection Against Arc Flash and UV Radiation

A comprehensive range of welding helmets and hand-held face shields providing protection from arc flash, UV/IR radiation, and weld spatter. Includes standard PVC welding helmets, auto-darkening helmets for automatic lens shading, and hand shields in black and red. CE certified for international safety compliance.

7 featuresDetails

Safety Glasses

ANSI-Certified Eye Protection for Welding Environments

A range of polycarbonate safety glasses and goggles conforming to the ANSI-Z-87:1 standard for impact and UV eye protection. Includes chemical splash goggles, flip-front goggles, and stylish safety glasses with hard-coated lenses. Also available in anti-fog coating for high-humidity and temperature environments.

7 featuresDetails

Welding Machines & Equipment

6 products

Welding machines and equipment for MMA, MIG, TIG, and cutting processes — built for consistent industrial performance.

View Category

Arc Welding Machines

Dependable MMA Inverter Performance

MMA arc welding machines (inverter and transformer type) are the most commonly used welding equipment for electrode welding. Available from 160A to 400A, these machines are suitable for all mild steel and structural applications.

5 featuresDetails

MIG Welding Machines

Continuous Wire Feed Welding

MIG/MAG welding machines with integrated wire feed are used for continuous production welding of mild steel and stainless steel. Suitable for light to heavy fabrication with CO₂ or mixed gas shielding.

5 featuresDetails

TIG Welding Machines

Precision Welding for Critical Applications

TIG inverter welding machines deliver precision arc control for stainless steel, aluminium, and exotic metal applications. Both HF start (non-touch) and scratch start models are available.

5 featuresDetails

Gas Cutting Equipment

Complete Oxy-Fuel Cutting Outfits

Complete oxy-fuel cutting outfits including cylinders, regulators, hoses, and cutting torches for manual gas cutting and heating. Available as portable sets for site use and heavy-duty setups for workshop cutting.

5 featuresDetails

Welding Rectifiers

DC Output for Consistent Arc Performance

Welding rectifiers convert AC mains supply to smooth DC output for stable arc welding. DC output reduces spatter, improves arc stability, and is preferred for low-hydrogen and stainless steel electrode welding.

5 featuresDetails

Portable Welding Machines

Welding Anywhere, No Grid Needed

Diesel engine-driven generator welders provide independent welding capability at remote sites and locations without mains power. Combine welding output with auxiliary power for tools and lighting.

5 featuresDetails

Cutting & Gouging Products

3 products

Cutting and gouging products for metal removal, joint preparation, and surface work in industrial and maintenance environments.

View Category

Cutting Rods

Thermal Cutting with Arc Rods

Cutting rods (exothermic or tubular) are used for underwater and above-water thermal cutting of metals and concrete. They provide high heat output for cutting through thick and contaminated sections.

5 featuresDetails

Carbon Electrodes

Thermal Gouging and Cutting

Carbon electrodes for air arc gouging are used in industrial metal removal and joint preparation. The combination of electric arc and compressed air blast melts and blows away metal rapidly.

5 featuresDetails

Gouging & Cutting Torches

Air Arc and Gas Cutting Torches

Specialised torches for air arc gouging and oxy-fuel cutting including replaceable carbon jaw torches and heavy-duty cutting heads. Available for handheld and machine-mounted applications.

5 featuresDetails

Can't Find What You're Looking For?

Contact our team for specific product enquiries, bulk requirements, or sourcing requests.

Enquire Now Call +91 98198 42474